Norman's Electronics, Inc

We repaired this beautiful vintage Marantz receiver. A model 2250B. A great looking and sounding receiver. Rated at 50 watts per channel and weighing about 35 pounds. The 2250B was manufactured from 1975-1977.

We recently serviced this nice Pioneer SX-650. This model was made from 1976-1978 and has the same look of many of the mid to late 70s Pioneer receivers. A very clean and solid 35 watts a channel, it sounds very nice. It weighs about 30 pounds.

We recently repaired this Denon PMA-720 integrated amplifier. It was made in the late 80s and has 80 watts per channel. Very nice amp with 7 inputs including phono , tuner, CD, two auxiliary and two tape inputs.

We repaired this beautiful McIntosh tuner/preamp model MX-113. It had a been dropped and had several issues including a cracked front glass panel. We were able to get the original front panel glass from McIntosh and take care of all the issues, including damaged controls and previous poor service attempts. It’s impressive they were able to supply the glass for a unit made in 1975.

We recently repaired this pretty Yamaha CA-410II amplifier. It is only weighs about 20 pounds but has a great sound with a very clean 40 watts a channel. It features analog VU meters and a classic look. It was manufacturerd in 1977 and looks almost new.

We repaired this Sony STR-V5 receiver. It was made from 1978-1981, this unit has a very clear sounding 85 watts a channel. It seems louder when playing. It is Sony’s version of the large 70s receiver with the large silver knobs and face. It has a very nice bright tuning dial and meters to add to its look.

What was cutting edge in the late 70s/early 80s is now vintage. Below is our business card from that era and for our 65th anniversary, we have created T-shirts with that now vintage look. If you would like one, please message us for details!

We repaired this very pretty Pioneer SX-434. The little brother of the larger Pioneer receivers of the mid 70s. It was a lower power and lower priced option when sold from 1974-76. It still looks great and sounds very good. The original owner’s son was thrilled to have it working again.

We recently repaired this Marantz SR-6000G receiver. It was made in 1980 and is one of the first models that Marantz made with a gold front and changed they changed output section from discrete transistors to STK output ICs. It has 70 watts a channel and is now back up and running after a good deal of work.

Here is a peek at our past and beginnings. We would not still be in business if not for the hard work of my late brother Lane and our amazing team of employees - past and present and our trusting customers Thank you - Jamie

We repaired this classic Nakamichi RX-202. It has their unique uni-direction auto-reverse mechanism. This unit was made from 1982-1993 and is a very high tech cassette deck.

We have become an authorized retailer for Sumiko phono cartridges and replacement stylus. They offer a wide verity of moving coil and moving magnet cartridges. Visit sumikophonocartridges.com and see all their options. We can often meet or beat the prices from Amazon or other retailers... Shop local this holiday season

We had a client bring in a Pioneer SX-727 receiver and a Technics SL-1200 turntable. Both are from the early 70s & are now running great. The SX-727 was made from ‘72-‘74. It has the classics Pioneer silver face and wood cabinet. It can handle 2 tape decks, 2 turntables and 3 sets of speakers. The SL-1200 is the first generation of the popular DJ turntable that has versions still being sold today. It features a servo controlled direct drive motor. We had them running and testing together with a Van Halen LP at the front counter. Many comments were made on the equipment and the album.

We recently repaired this Kenwood receiver. This is the KR-6160. It was made in 1970 and is 70 watts a channel. Similar to other receivers of this era, it has the wooden cabinet and silver face but it adds the black tuner dial and a slide balance control. It has 2 phono & 2 auxiliary inputs plus a tape input. It also gives options to drive 3 sets of speakers in combinations of two; a feature more common on much larger receivers.

We repaired this beautiful Pioneer PL-570X Turntable. Quartz lock direct drive motor and fully automatic. It was made in made from 1977-1978 and weighs 30 pounds. This black base version was only sold over seas. This client’s father bought it Japan while in the service.

We repaired this client’s Pioneer silver face system. All made between 1975 and 1978. An Integrated amp SA-9100, Tuner TX-6500II and CT-F500 cassette deck. All are solid units and sound amazing together. The amp looks beautiful and weighs 30 lbs and has 60 watts a channel. It’s has a ton of tone controls and options.

We repaired a NAD 3140 intergraded amp. It was made from 1981-1983 and is a great sounding amp for its size. It’s rated at 40 watts per channel channel. It has great separation and a lot of punch for 40 watts.

A client from South Carolina shipped in a Scott 683DM cassette deck for repair. The belts had deteriorated to goo but we were able to remove the old rubber residue and find new belts and get it going again. The customer has the entire system that he bought in Europe when in the service and is excited to have this part of it the system working again. This model was made in the early 80s.

We recently repaired this Pioneer reverberation amplifier model SR-9 for a client from Columbus, Ga. This model was made in the early 80s (82-83) The SR-9 was an easy way to simulate the acoustics of any size room and to add ambience. It had a cool display that pulsates in time to the varying decay response. It is as eye-catching as it is functional.

The original owner of this beautiful McIntosh MC2120, who brought it into be serviced, told us, he was walking by a store in Birmingham and heard this great jazz and wanted to see the band. He finds out, there was no band, just a MC2120 being demonstrated. That was in 1982. He has loved it ever since. It’s a powerful 120 watts per channel into 8 (stereo), 240 watts into 8 (mono) and weighs about 60 pounds.

We repaired a Stromberg-Carlson ASR-433 Stereo Integrated Tube Amplifier. It’s the amp for a console made in the early 1960s. Amazing sound from this amp. Hard to believe it’s 60 years old. #vintageaudio #tubeamp